LED Driver (HH-PS12V)

Some information about the product is as below: (1)Switching Power Supply; (2)Input voltage range: (100) VAC to (240) VAC; (3)Line frequency: (50) Hz to (60) Hz; (4)Deposited temperature: -25~+75 ; (5)Relative humidity: 10%~95%; (6)Altitude: Sea level to 25, 000feet; (7)Work temperature: -5~+40; (8)Leakage current: Less than 0.5mA 240Vac 50Hz; (9)Power Supply Dimensions: 115(L)*47(W)*33(H) mm; (10)Output power: The unit output power from all voltage under steady state conditions will not exceed 36 watts; (11)Efficiency: The efficiency (watts out/watts in) shall be a typical of 80% under all line conditions and full load; (12)Input current: An input fuse with a rating of 3 amps, shall be provided to protect the power supply and the input wiring; (13)Input voltage: The power supply shall be self-protecting for any steady or dynamic variation of the input voltage below the ratings specified in paragraph; (14)Output voltage: The power supply shall shut down all output when any output voltage teaches to its over voltage protection trigger point; (15)Output current: Overload conditions shall case both the output current and the output voltage to decrease. Removal of an output overload conditions shall lead automatic recovery of the output voltage; (16)Short circuit protection: The power supply shall be protected such that a short from any output to return or other output shall case on damage to the power supply or below primary fuse: The supply may shut down in the event of short circuit and recover power.